Standard Svensk standard · SS-EN 10336:2007

Kontinuerligt varmbelagd och elektrolytiskt belagd plåt och band av flerfasstål för kallformning - Tekniska leveransbestämmelser

Status: Upphävd

· Ersätts av: SS-EN 10346:2009
Köp denna standard

Standard Svensk standard · SS-EN 10336:2007

Kontinuerligt varmbelagd och elektrolytiskt belagd plåt och band av flerfasstål för kallformning - Tekniska leveransbestämmelser
Prenumerera på standarden - Läs mer Dölj
Pris: 1 152 SEK
standard ikon pdf

PDF

Pris: 1 152 SEK
standard ikon

Papper

Fler alternativ Färre alternativ
Provläs denna standard
Omfattning
1.1 This European Standard specifies requirements for continuously hot-dip coated and electrolytically coated flat products made of multiphase steels for cold forming (see Table 1, Table 3 and Table 4) coated with zinc (Z and ZE), zinc-iron alloy (ZF) or zinc-nickel alloy (ZN) with thicknesses of 0,35 mm to 3,0 mm, unless otherwise agreed (see 1.2). The thickness is the final thickness of the delivered product after coating. This European Standard applies to strip of a width = 600 mm and sheets cut from it. 1.2 If agreed at the time of enquiry and order, this European Standard may also be applied to continuously hot-dip coated flat products of thicknesses > 3,0 mm. In this case the mechanical property, adhesion of the coating and surface condition requirements should also be agreed at the time of enquiry and order. 1.3 The products covered by this European Standard are mainly used where cold formability, high strength and corrosion resistance are the most important factors. Corrosion resistance of the coating is proportional to the coating mass (see also 7.3.5) 1.4 This European Standard is not applicable to: • continuously hot dip coated steel flat products made of low carbon steels (see EN 10327); • continuously hot-dip coated structural steel flat products (see EN 10326); • electrolytically zinc coated cold rolled steel flat products (see EN 10152); • continuously organic coated (coil coated) steel flat products (see EN 10169-1, EN 10169-2 and EN 10169-3); • electrolytically zinc-nickel coated cold rolled steel flat products (see EN 10271); and • continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming (see EN 10292).

Ämnesområden

Platta stålprodukter och halvfabrikat (77.140.50)


Köp denna standard

Standard Svensk standard · SS-EN 10336:2007

Kontinuerligt varmbelagd och elektrolytiskt belagd plåt och band av flerfasstål för kallformning - Tekniska leveransbestämmelser
Prenumerera på standarden - Läs mer Dölj
Pris: 1 152 SEK
standard ikon pdf

PDF

Pris: 1 152 SEK
standard ikon

Papper

Fler alternativ Färre alternativ

Produktinformation

Språk: Engelska

Framtagen av: Konstruktionsstål, SIS/TK 142

Internationell titel: Continuously hot-dip coated and electrolytically coated strip and sheet of multiphase steels for cold forming - Technical delivery conditions

Artikelnummer: STD-60906

Utgåva: 1

Fastställd: 2007-05-04

Antal sidor: 26

Ersätts av: SS-EN 10346:2009